User's Manual

10
Vibrate
Vibrate Meaning
Vibrate Mode Data successfully scanned and sent to host device.
If the CHS supports SPP mode for your OS, you can modify the LED, beep and
vibrate settings, by using the Scanner Settings utility (see chapter for your OS).
Bluetooth Mode Sequence
When the CHS is powered on, its Bluetooth mode will gradually change if no connection is made.
Time after turning on CHS Bluetooth mode
0-5 minutes Discoverable and connectable
5 minutes CHS automatically powers off
If a button is pressed, but no connection is made, the CHS will stay powered on
for another 5 minutes.
Simultaneous Use of CHS and Socket Plug-in Device
You can use the CHS and a Socket plug-in barcode / RFID / magnetic stripe reader
simultaneously on the same host computer or device. However, you will need to run two
different versions of SocketScan concurrently.
• For the CHS, use SocketScan 10, which you can download from:
http://www.socketmobile.com/support/downloads/data-collection/series7/ss10/
• For Socket plug-in devices, use SocketScan 7 (or older), which you can download from:
http://www.socketmobile.com/support/downloads/data-collection/series5/
• For more information about Socket plug-in devices for data collection, please visit:
http://ww1.socketmobile.com/products/handheld-computers/accessories-
hc.aspx?cat=Data%20Collection