User's Guide
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Hardware Preparation
- 3 | Setup for Windows Mobile
- 4 | Setup for Palm
- 5 | Setup for Windows XP
- STEP 1: Install the Software
- STEP 2: Configure Bluetooth Settings
- STEP 3: Configure Scanner Settings
- STEP 4: Start SocketScan and Connect to CHS
- STEP 5: Scan Data into Your Application
- Assigning Sound and Prefix/Suffix Settings
- Configuring Advanced Bluetooth Settings
- Assigning a Trigger Button
- Selecting Symbologies
- Viewing Version Information
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Bar Code Label Specifications
- Appendix D Enabling or Disabling Symbologies
- Appendix E Decode Zone
- Appendix F Troubleshooting
- Appendix G Technical Support
- Limited Warranty
- Regulatory Compliance
APPENDIX A
S
PECIFICATIONS
Physical Characteristics
Size: 125l x 31h x 35w (mm) 4.9l x 1.2h x 1.4w (in.)
Total Mass: approx. 90 g (0.2 lb)
Power Source: Two AAA NiMH rechargeable batteries
Expected Battery Life with Normal Operation (connected via Bluetooth and
minimum 2,000 bar code scans): 8 hours
Operating Temp: 32 to 120°F (0 to 50°C)
Operating System Support:
• Windows Mobile 2003, 2003SE, 5.0
• Windows XP, XP Tablet Edition
• Palm OS v5.2 and later
For information about using the CHS with Symbian OS, please visit:
www.socketmobile.com/products/bar-code-scanning-data-
collection/series7/
2005 Sunrise Date Compliant
Scanning Characteristics
Bar Code Symbologies Decoded:
CHS 7E:
Code 39, UPC/EAN/JAN, MSI, Code 128, Code 93, Codabar, I 2 of 5,
D 2 of 5
CHS 7M/7P:
Code 39, UPC/EAN/JAN, MSI, Code 128, Code 93, Codabar, I 2 of 5,
D 2 of 5, RSS-14, RSS Limited/Extended Stacked, Chinese 2 of 5
Scanner Type:
CHS 7E: CMOS linear imager
CHS 7M: Class 1 laser
CHS 7P: Class 2 laser
Laser Scan Angle: 46.5°
Laser Scanner Performance:
Scan Repetition Rate: 100 scans/sec (bi-directional)
Decode Distances (depends on symbol size, symbology, label media, W-N
Ratio, scan angle)
CHS 7E: 2.2 to 24 inches typical
60 | APPENDIX A: SPECIFICATIONS