User's Guide
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Hardware Preparation
- 3 | Setup for Windows Mobile
- 4 | Setup for Palm
- 5 | Setup for Windows XP
- STEP 1: Install the Software
- STEP 2: Configure Bluetooth Settings
- STEP 3: Configure Scanner Settings
- STEP 4: Start SocketScan and Connect to CHS
- STEP 5: Scan Data into Your Application
- Assigning Sound and Prefix/Suffix Settings
- Configuring Advanced Bluetooth Settings
- Assigning a Trigger Button
- Selecting Symbologies
- Viewing Version Information
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Bar Code Label Specifications
- Appendix D Enabling or Disabling Symbologies
- Appendix E Decode Zone
- Appendix F Troubleshooting
- Appendix G Technical Support
- Limited Warranty
- Regulatory Compliance
CHS Security Settings: Enter a PIN code and/or any authentication or
encryption settings. If desired, click Delete Bonding to delete any
bonding/pairing information in the CHS. After making any changes, click
OK.
6. If you modified any security settings, you will be prompted to turn your CHS
off and back on to make the changes take effect. Read the message and click
OK. Turn the CHS off and back on again.
7. When you return to the CHS Advanced Settings screen, click Close.
8. In the SocketScanXP Settings screen, click OK.
9. Exit and restart SocketScanXP to have your changes take effect.
56