User's Guide
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Hardware Preparation
- 3 | Setup for Windows Mobile
- 4 | Setup for Palm
- 5 | Setup for Windows XP
- STEP 1: Install the Software
- STEP 2: Configure Bluetooth Settings
- STEP 3: Configure Scanner Settings
- STEP 4: Start SocketScan and Connect to CHS
- STEP 5: Scan Data into Your Application
- Assigning Sound and Prefix/Suffix Settings
- Configuring Advanced Bluetooth Settings
- Assigning a Trigger Button
- Selecting Symbologies
- Viewing Version Information
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Bar Code Label Specifications
- Appendix D Enabling or Disabling Symbologies
- Appendix E Decode Zone
- Appendix F Troubleshooting
- Appendix G Technical Support
- Limited Warranty
- Regulatory Compliance
CONFIGURING ADVANCED BLUETOOTH SETTINGS
The SocketScanXP utility enables you configure advanced Bluetooth settings of
the CHS, including the Bluetooth friendly name and security settings.
1. In SocketScanXP Settings, click on the CS tab.
The Trigger and Barcodes tabs will only appear if you are
connected to the CHS.
2. At the bottom of the CS screen, the CHS battery level will be indicated
by a status bar. Click Advanced.
3. The CHS Advanced Settings screen will appear, reporting the current
Bluetooth friendly name assigned to the CHS.
4. If desired, select Friendly Name or Security and click Change.
5. In the screen that appears, enter any changes and click OK.
CHS Friendly Name: Enter a new friendly name and click OK.
CHAPTER 4: SETUP FOR WINDOWS XP 55