User's Guide

STEP 2: CONFIGURE BLUETOOTH SETTINGS
Skip this step if you installed and want to use Connect!Agent, which
automatically configures the Bluetooth settings. Connect!Agent works only
with the Socket (IVT) and Microsoft stacks.
If you will not be using Connect!Agent, follow the appropriate instructions
for your Bluetooth stack. Configuration is only needed the first time you
connect the CHS to your computer.
SocketScan supports a generic Bluetooth COM port and may be able to
connect to Bluetooth stacks on host mobile computers other than those
listed.
Socket Connection Kit with IVT BlueSoleil software:
1. Turn on the Cordless Hand Scanner. Press the small power button for
five seconds, until you see the LED turn blue. The LED should blink
blue once per second to show that the Bluetooth radio is on but not
connected.
2. Insert the Socket card into your computer, using a CF-to-PC Card adapter.
3. Start BlueSoleil. Click on the BlueSoleil icon on your desktop, or click
Start | All Programs | IVT BlueSoleil | BlueSoleil.
4. Click My Bluetooth | Security. Check the box Set Default Passkey and
enter the default PIN
1234 in the field below.
CHAPTER 4: SETUP FOR WINDOWS XP 43