User's Guide
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Hardware Preparation
- 3 | Setup for Windows Mobile
- 4 | Setup for Palm
- 5 | Setup for Windows XP
- STEP 1: Install the Software
- STEP 2: Configure Bluetooth Settings
- STEP 3: Configure Scanner Settings
- STEP 4: Start SocketScan and Connect to CHS
- STEP 5: Scan Data into Your Application
- Assigning Sound and Prefix/Suffix Settings
- Configuring Advanced Bluetooth Settings
- Assigning a Trigger Button
- Selecting Symbologies
- Viewing Version Information
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Bar Code Label Specifications
- Appendix D Enabling or Disabling Symbologies
- Appendix E Decode Zone
- Appendix F Troubleshooting
- Appendix G Technical Support
- Limited Warranty
- Regulatory Compliance
SELECTING SYMBOLOGIES
The applet makes it quick and convenient to modify which symbologies
you want the scanner to recognize. By default, the scanner is set to
recognize nine of the most common symbologies.
1. Tap on the SocketScan icon. In the pop-up menu, tap Symbology Selector...
2. In the screen that appears, check the symbologies you wish to enable.
Uncheck those you wish to disable. For convenience, you can tap
Disable All to disable all the symbologies and select the ones you want.
Tap ok.
Symbologies not supported by the CHS will be gray.
Enabling all possible symbologies will make the decode
process slightly longer.
CHAPTER 2: SETUP FOR WINDOWS MOBILE 23