Product specifications

AUTO MODE AUTO MODE (CONTINUED)
16
17
Action Behavior
Notication
Beep Pattern LED Activity Vibrate
Place Scanner
in the Stand
Scanner
switches to
Presentation
Mode
High-high tone
conrms proper
seating*
Battery Status
LED is Disabled
None
Place a barcode
in the Scanners
Field of View
Decode Bar
Code
1 Beep when
Data success-
fully scanned
Green LED
blinks (while
scanning)
None
Action Behavior
Notication
Beep Pattern LED Activity Vibrate
Remove the
Scanner from
the Stand and
press the Trig-
ger button
Scanner
switches to
Mobile Mode
None Battery Status
LED is Enabled
Enabled
Press the Trig-
ger button
Decode Bar
Code
1 Beep when
Data success-
fully scanned
Green LED
blinks (while
scanning)
Vibrate when
Data success-
fully scanned
Presentation Mode: Bar Codes placed in the Scanner’s eld of view are automatically scanned.
Mobile Mode: Pressing the Trigger button initiates a scan.
*Note: 7Qi/7Xi will beep High-high tone even if the Scanner is Power Off (to indicate charging)
Auto Mode (In the Stand)
Mobile Mode (Not in the Stand)
1. Pair and connect the 7Qi/7Xi to your device prior to placing the scan-
ner in Auto Mode. The Scanner is not discoverable when in Auto Mode
and in the Stand. This facilitates a fast connection to the current
connected device when powered on (for example the start of the
new business day).
2. The Trigger button must be pressed to disable Presentation Mode
(and enable Mobile Mode) after the scanner is removed from the
Stand.
3. The Scanner will not turn off when its in Presentation Mode and in
the Stand under AC Power.
4. To avoid excessive power drain, the scanner should not be left out of
the Stand in Auto Mode. Either press the Trigger button or Power off
the scanner.