QX Stand Quick Start Guide Attachable QX Stand SKU# AC4076-1538 P/N 9010-01538
PRODUCT INFORMATION PACKAGE CONTENTS LED* Charging Pins Magnet Hook or QX Stand AC Adapter USB Charging Cable *Use the plug that is regionally appropriate Thank you for choosing Socket Mobile! Let’s get started! © 2015 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, and SocketScan are registered trademarks or trademarks of Socket Mobile, Inc. The Bluetooth word mark and logo are registered trademarks of the Bluetooth SIG, Inc. USA, and any use by Socket Mobile, Inc.
ASSEMBLY OVERVIEW CONNECTING THE SCANNER HOLDER TO THE POST B. (Front view) A. B. (Bottom view) A. C. D. E. A. B. C. D. 4 Holder Base Post Micro USB (2m) G. C. F. E. Cushion Crown F. Pem Cap / Camera Mount* G. Wood Screws (2)** *Optional for Camera Mount (See page 14) **Optional for table mount (see page 12) B. A. B. C. Flip the holder upside down and insert the cushion crown into the bottom of the holder. Insert the post into the bottom of the holder.
INSERTING THE USB CABLE THROUGH THE BASE UNIT CONNECTING THE USB CABLE TO THE HOLDER Base (Bottom View) A. Back B. Base (Top View) A. B. Front Insert Micro USB from under the base. 6 C. Remove Micro USB cover. Insert Micro USB connector into port and fit usb cable into the cord keeper. Leave enough slack to allow freedom of movement. Place cover. C.
CONNECTING THE SCANNER HOLDER TO THE POST HOW TO UNLOCK 1. 2. To unlock, find the small latch on the bottom of the base. Pull the latch back and turn the post clockwise aligning the marker with the unlock icon. Base (Bottom View) Small latch Insert the post into the top of the base lining up the marker on the post to the unlock icon. Push down and turn the post towards the lock icon until you hear a click.
QX STAND OPERATIONS QX STAND OPERATIONS When charging the scanner, make sure the charging pins on the stand and the scanner make contact with each other and the red LED on the stand is illuminated.
OPTIONAL QX STAND TABLE MOUNT OPTIONAL QX STAND TABLE MOUNT (CONTINUED) Magnet Two keyholes are provided on the QX Stand Base for an optional installation on a wooden surface using the included screws (quantity 2) and Drill Template. Command Barcode “Auto Mode” 1. Place the QX Stand on the Drill Template and situate these onto the desired location of your surface. Rotate the Stand so that it aligns with the solid Notch (not the dotted Notch) on the Template. 2.
OPTIONAL CONFIGURATION WHEN USING A Camera Mount B. COMMAND BARCODES QX Stand Modes A. Mobile Mode - Normal (default)* Scanning this bar code will enable the scanner to enter mobile mode. It will always be in manual trigger mode even when placed in the stand or cradle. *Scanner Factory Reset returns to Mobile Mode. A. B. 14 Attach the Pem cap to your Camera Mount (1/4” - 20 x 3/4” thread) and turn to the right.
AUTO MODE AUTO MODE (CONTINUED) Auto Mode (In the Stand) Action Behavior Notification Beep Pattern LED Activity Vibrate Place Scanner in the Stand Scanner switches to Presentation Mode High-high tone confirms proper seating* Battery Status LED is Disabled None Place a barcode in the Scanners Field of View Decode Bar Code 1 Beep when Data successfully scanned Green LED blinks (while scanning) None *Note: 7Qi/7Xi will beep High-high tone even if the Scanner is Power Off (to indicate charging)
PRODUCT SPECIFICATIONS HELPFUL RESOURCES Dimensions Stand Height 8.75 in (222 mm) Holder Width 1.80 in (46 mm) Holder Length 5.50 in (140 mm) Base Diameter 5.75 in (146mm) Total Weight Without Scanner and AC Adapter 16 oz (454 g) With Scanner and without AC Adapter 17.6 oz (500 g) Antimicrobial Rating JLS z2801:2000 Test: 2.49 on MRSA 6.07 when cleaned with SaniCloth Plus cloth wipes Biosafe HM4100, EPA#83019-1 18 Technical Support & Product Registration: http://support.socketmobile.
Compliance Statement CE MARKING AND EUROPEAN UNION COMPLIANCE The unit under test was found compliant with all the applicable Directives, 2004/108/EC and 2006/95/EC. WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT The WEEE directive places an obligation on all EU-based manufacturers and importers to take-back electronic products at the end of their useful life. ROHS STATEMENT OF COMPLIANCE This product is compliant to Directive 2011/65/EU.
