User's Manual

6 | Socket Dialer
This chapter explains how to assign a dialing prefix and use the
Socket Dialer to dial a number directly from your Contacts list.
The Socket Dialer makes it quick and easy to perform dial-up
networking.
If you have not done so already, be sure to run the Dialer Installer from the
Socket installation CD. While installing the program, you can also assign
the dialing prefix.
To install the software: In the Socket Connection Kit Setup Center, on the
Installation page, scroll down and click on the Dialer Installer link.
Note: The Socket Dialer has been verified to work with Nokia and Ericsson
phones and is known not to work with the Motorola 270c, NTT Docomo
Paldio 633S or Sony au C413S phone. Results may vary with other phones
that are not officially supported by the Socket Connection Kit.
Assign a Dialing Prefix
If you have not already assigned a dialing prefix during the install process,
you can do so by following these steps:
1. Go to Start | Settings | System. Tap on Socket Dialer.
2. Select the appropriate Dialing Prefix, then tap ok.
CHAPTER 7: SOCKET DIALER | 57