User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | General Installation
- 3 | Dial-up Networking
- 4 | Bluetooth ActiveSync and LAN Access
- 5 | Socket OBEX
- 6 | Socket Dialer
- 7 | Bluetooth Serial Port
- 8 | Bluetooth Faxing and Printing
- 9 | My Device Manager
- 10 | Bluetooth Devices Folder
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Troubleshooting
- Appendix D Technical Support
- Limited Warranty
- Regulatory Compliance
Bluetooth LAN Access
1. Tap on the Bluetooth icon. In the pop-up menu, select Bluetooth LAN
Access.
Note: The menu will
list Transfer via
Bluetooth only if you
installed Socket
OBEX.
2. The next screens will vary depending on if you saved any access points
to your Bluetooth Devices folder, and if you designated one as your
favorite. Please refer to the appropriate scenario:
SCENARIO #1: Your Bluetooth Devices folder contains access
points, but you did not designate one as your favorite.
(a) When you tap Bluetooth LAN Access, a screen will appear listing
access points saved in your Bluetooth Devices folder. Choose the
access point you want to connect to and tap Select.
Note: If your access point is not listed, tap Find and proceed as
described in Scenario #3.
CHAPTER 4: BLUETOOTH ACTIVESYNC AND LAN ACCESS | 39