User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | General Installation
- 3 | Dial-up Networking
- 4 | Bluetooth ActiveSync and LAN Access
- 5 | Socket OBEX
- 6 | Socket Dialer
- 7 | Bluetooth Serial Port
- 8 | Bluetooth Faxing and Printing
- 9 | My Device Manager
- 10 | Bluetooth Devices Folder
- Appendix A Specifications
- Appendix B Safety and Usage Tips
- Appendix C Troubleshooting
- Appendix D Technical Support
- Limited Warranty
- Regulatory Compliance
4. In the next screen, enter the following settings:
• Enter a name…: Enter a name for the dial-up connection.
• Select a modem: Select Bluetooth Phone.
• Baud Rate: Select 115200.
Tap Advanced…
Note: Remember what you name the connection. You will need it when
dialing up to it.
5. The Port Settings screen will appear. Do not change any settings.
6. If needed, tap on the TCP/IP and/or Name Servers screens to enter any
necessary settings for your office network or ISP. Tap ok.
30 | CHAPTER 3: DIAL-UP NETWORKING