User's Manual

42 | CHAPTER 4: BLUETOOTH ACTIVESYNC AND LAN ACCESS
SCENARIO #3: You did not save any access points to the Bluetooth
Devices folder
(a) When you tap Bluetooth LAN Access, the mobile computer will
automatically begin to search for new Bluetooth enabled devices.
(b) After the search is complete, select the access point you wish to connect
to. Tap Select. If the access point is not listed, tap Refresh to search again.
(c) After you tap Select, a service discovery phase will begin, lasting 5-10
seconds. If the LAN requires a Passkey, a screen will appear, asking
for the Passkey. Enter the passkey, then tap Reply.
(e) After a successful connection is made, the screen will report
Connected.
If you would like to
save the new access
point to your Bluetooth
Devices folder, check
Save selection for
future use.
Note: You can also start the
device search by tapping
Refresh in the New Bluetooth
Devices screen. See Scenario
#1.