User's Manual

CHAPTER 3: DIAL-UP NETWORKING | 33
12. ONLY FOR MOTOROLA TIMEPORT 270C OR
NOKIA 3650/6310/7650/8910/8910i
:
a) After you tap Connect for the first time, the phone will
display a message asking if you want to bond. On
Motorola, enter GRANT; on Nokia, enter ACCEPT.
b) Make up a 4-16 digit passkey, enter it on the phone,
then enter it on the Pocket PC.
c) After successfully bonding with your phone, you may want to set up
your phone to automatically bond with your Pocket PC without
requiring a passkey every time. For instructions, refer to
“OPTIONAL: Set up Automatic Phone Connections,” at the end of
this chapter.
13. To use a different phone for dial-up networking, you can use the same
connection setup, but you must make the new phone your favorite. Just
run the Get Connected! Wizard again, select the new phone, and make it
your new favorite when prompted.
Alternatively, you can use the Bluetooth Devices folder to change your
favorite phone (see Chapter 10 for instructions).
Note: The
Bluetooth icon
in the Today
screen will blink
to indicate a
connection.