User's Manual

CHAPTER 3: DIAL-UP NETWORKING | 27
d) Depending on your phone and connection settings, you may need to
enter a passkey and/or a password before the phone will start to
dial:
• If you have a Nokia 3650/6310/7650/8910/8910i
or Motorola Timeport 270C, you must complete
the bonding process:
a. The first time you try to connect, the phone will
ask if you want to bond. On Motorola, enter
GRANT; on Nokia, enter ACCEPT.
b. Make up a 4-16 digit passkey, enter it on the phone,
then enter it on the Pocket PC.
c. After successfully bonding with your phone, you may want
to set up your phone for automatic connections. For
instructions, refer to “OPTIONAL: Set up Automatic Phone
Connections,” at the end of this chapter.
• If you did not
save the dial-up password, the Network Log On
screen may appear. Enter the Password and tap OK.
e) When the mobile computer starts calling, you should see the call
status on both the mobile computer screen and phone display.