User's Manual

CHAPTER 3: DIAL-UP NETWORKING | 23

8. In the next screen, enter the User name and Password. Tap Advanced…

9. In the General screen, enter the following settings:

• Baud rate: 115200

• Wait for dial tone before dialing: Uncheck

10. The next step varies depending on if your network uses DHCP or a

static IP address.

• If your network uses DHCP, tap ok. In the last screen, tap Finish.

• If you need to enter IP addresses, tap on the TCP/IP and Servers tabs

to enter the necessary settings. Tap ok. In the last screen, tap Finish.

Now you have finished creating a connection and are ready to dial up to

your network. Socket recommends using either of two methods for dialing

in and connecting to your network.

Unchec