User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Setup for the SoMo®
- 3 | SocketScan Plug-in Software
- 4 | RFID Demo
- Appendix A Product Specifications
- Appendix B HF RFID Standards and Tag Descriptions
- Appendix C Barcode Label Specifications
- Appendix D Enabling or Disabling Symbologies
- Appendix E Laser Decode Zone
- Appendix F Troubleshooting
- Appendix G Technical Support
- Limited Warranty
- Regulatory Compliance
STEP 1: Assign Trigger Button(s)
You must set up a mechanism for triggering the SOMO 655 RFID Reader Card.
Hardware button(s) are the best triggering method from a handheld device.
Note: If you do not want to assign a hardware button, you use SocketScan Trigger
software, which enables you to tap on a software icon to trigger SocketScan Plug-in
and the RFID reader/barcode scanner.
Windows Mobile 6
1. In the Today screen, tap Getting Started.
2. In the list, tap on Set up Data Capture triggers.
CHAPTER 2: SETUP FOR THE SOMO 9