User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Setup for the SoMo®
- 3 | SocketScan Plug-in Software
- 4 | RFID Demo
- Appendix A Product Specifications
- Appendix B HF RFID Standards and Tag Descriptions
- Appendix C Barcode Label Specifications
- Appendix D Enabling or Disabling Symbologies
- Appendix E Laser Decode Zone
- Appendix F Troubleshooting
- Appendix G Technical Support
- Limited Warranty
- Regulatory Compliance
2 | Setup for the SoMo
®
This chapter shows how to install, configure, and use the SOMO 655
RFID Reader Card Series 6 on any version of the Socket Mobile SoMo
handheld computer.
Setup Summary
STEP 1: Assign a trigger button.
STEP 2: Start SocketScan Plug-in.
STEP 3: Insert the card.
STEP 4: Read tag IDs into your program.
Note: No software installation is required to use the SOMO 655 RFID Reader Card on
the SoMo. However, you may choose to upgrade the SocketScan Plug-in software.
The latest software is available online at:
http://www.
socketmobile.com/support/downloads
8