User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Setup for the SoMo®
- 3 | SocketScan Plug-in Software
- 4 | RFID Demo
- Appendix A Product Specifications
- Appendix B HF RFID Standards and Tag Descriptions
- Appendix C Barcode Label Specifications
- Appendix D Enabling or Disabling Symbologies
- Appendix E Laser Decode Zone
- Appendix F Troubleshooting
- Appendix G Technical Support
- Limited Warranty
- Regulatory Compliance
APPENDIX B: HF RFID STANDARDS AND TAG DESCRIPTIONS
39
LRI512 ISO15693 (ST Microelectronics)
The full LRI512 specification was included in “LRI512 Memory TAG IC 512 bit High
Endurance EEPROM 13.56MHz, ISO 15693 Standard Compliant with E.A.S.” by ST
Microelectronics.
Figure 5 - Memory Structure of the STM LRI512
512 bits (64 bytes) of user memory is available for read/write.
Block #
32 bits
(4 bytes per block)
3 (0x03)
4 (0x04)
5 (0x05)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
14 (0x0E)
15 (0x0F)
The user can permanently lock any
block.
Once a block is locked it can not
be unlocked.
A 64-bit ID (factory programmed) uniquely identifies each STM LRI512 chip.
TID 0xE0 0x02 Unique Tag ID 48 bits (6 bytes)