User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Setup for the SoMo®
- 3 | SocketScan Plug-in Software
- 4 | RFID Demo
- Appendix A Product Specifications
- Appendix B HF RFID Standards and Tag Descriptions
- Appendix C Barcode Label Specifications
- Appendix D Enabling or Disabling Symbologies
- Appendix E Laser Decode Zone
- Appendix F Troubleshooting
- Appendix G Technical Support
- Limited Warranty
- Regulatory Compliance
APPENDIX A: PRODUCT SPECIFICATIONS 35
Maximum Read Range: ~ 3.0 inches for ISO15693 tags, depending on tag antenna size
HF RFID Tags Supported
ISO15693: ICode SL2, LRI512, my-d, Tag-It HF-I
Proprietary: ICode SL1, PicoTag (no anti-collision), Tag-It HF
ISO14443A: Mifare (Tag ID only), Mifare Ultralight (no anti-collision)
Barcode Scanner Characteristics (6P2 only):
Symbology Support: Chinese 2 of 5, Codabar, Code 11, Code 128, Code 39, Code 93,
Discrete 2 of 5, GS1-128, GS1 DataBar (formerly RSS), Interleaved 2 of 5, MSI,
UPC/EAN
Scan Repetition Rate: 100 scans/sec (bidirectional)
Optical Resolution: 0.004 in. minimum/barcode element width (X Dimension)
Print Contrast: Minimum 25% absolute dark/light reflectance (MRD) measured at 650
MRD
Scan Angle: Wide (default): 47° ±3°, Narrow: 35° ±3°
Decode Zone: 1.5 to 45+ inches (3.8 to 144+ cm)