User's Manual

Table of Contents
COPYRIGHT NOTICE 2
1 | INTRODUCTION 5
About the Software 6
Package Contents 6
System Compatibility Requirements 6
Accessory 7
Product Registration 7
2 | SETUP FOR THE SOMO
®
8
STEP 1: Assign Trigger Button(s) 9
STEP 2: Start SocketScan Plug-in 13
STEP 3: Insert the Card 13
STEP 4: Open Your Application 14
STEP 5: Read Data into Your Application 15
3 | SOCKETSCAN PLUG-IN SOFTWARE 18
RFID Settings 19
Symbology Selector 22
SocketScan Trigger 23
DUAL DEVICE SUPPORT 25
4 | RFID DEMO 26
Read an RFID Tag 27
Enable Inventory and Loop Modes 29
Select Tag Type 30
ADVANCED: Write to Tag 31
APPENDICES
A PRODUCT SPECIFICATIONS 34
B HF RFID STANDARDS AND TAG DESCRIPTIONS36
ISO15693 36
Tag-it HF 40
I·Code1 41
PicoTag 42
ISO14443 43
C BARCODE LABEL SPECIFICATIONS 46
D ENABLING OR DISABLING SYMBOLOGIES 47
E LASER DECODE ZONE 49
F TROUBLESHOOTING 50