User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Setup for the SoMo®
- 3 | SocketScan Plug-in Software
- 4 | RFID Demo
- Appendix A Product Specifications
- Appendix B HF RFID Standards and Tag Descriptions
- Appendix C Barcode Label Specifications
- Appendix D Enabling or Disabling Symbologies
- Appendix E Laser Decode Zone
- Appendix F Troubleshooting
- Appendix G Technical Support
- Limited Warranty
- Regulatory Compliance
Read an RFID Tag
1. Start RFID Demo. Tap Start | Programs | RFID Demo.
2. The main screen of RFID Demo will appear with blank fields.
3. Hold the device in the correct position to read an RFID tag, as described in
Chapter 2. Hold the device so the SOMO 655 RFID Reader Card is parallel
to and directly above the tag, at most 2.0 inches above the tag.
Parallel,
3.0 inches (7.6 cm)
max
imum
4. Tap Select Tags.
CHAPTER 5: RFID DEMO 27