User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Setup for the SoMo®
- 3 | SocketScan Plug-in Software
- 4 | RFID Demo
- Appendix A Product Specifications
- Appendix B HF RFID Standards and Tag Descriptions
- Appendix C Barcode Label Specifications
- Appendix D Enabling or Disabling Symbologies
- Appendix E Laser Decode Zone
- Appendix F Troubleshooting
- Appendix G Technical Support
- Limited Warranty
- Regulatory Compliance
DUAL DEVICE SUPPORT
SocketScan v7.2.4.0 and later supports the simultaneous use of two Socket
data collection devices with the same computer. This enables you to use the
SOMO 655 RFID Reader Card with a Socket Bluetooth barcode scanner on
the same computer.
Note: SocketScan Plug-in can capture data from only one cordless scanner at
a time.
Simply connect or plug in each device you plan to use as you normally
would.
The functionality of each device is the same, and no extra configuration is
required.
You can configure each device separately. In the SocketScan Plug-in menu,
tap on the appropriate device to configure its settings.
CHAPTER 4: SOCKETSCAN PLUG-IN SOFTWARE
25