User's Manual

CHAPTER 4: SOCKETSCAN PLUG-IN SOFTWARE 21
 Tag ID & Read Data: Select to read both the tag ID and tag
memory.
Starting block: If you selected a Read Data option, enter the number of
the first block you want to begin reading.
Number of blocks: If you selected a Read Data option, enter the
number of blocks you want to read.
Read error string: Enter the string you want your application to display in
case the RFID reader cannot read the tag data.
Tag type: Select the type of RFID tag you want to read. The Auto Detect
setting enables all tag types to be read.
Note: Choosing a specific tag may result in a longer read range and faster
read.
Inventory mode: Select for the RFID reader to read all tags present in an
RFID field, if supported by the tag type.
Display tag ID prefix: Select to display the RFID tag ID prefix with each
tag ID. The prefix indicates the tag type.
Displayable characters only: Select for the RFID reader to read only
displayable characters while reading data from the tag memory.
Otherwise, the RFID reader will also read “filler” symbols used in memory
blocks that aren’t completely filled with data. This option is only available
if you selected a Read Data trigger mode.
7. After selecting all of your Prefix/Suffix, Sound and RFID settings, tap ok.