User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Setup for the SoMo®
- 3 | SocketScan Plug-in Software
- 4 | RFID Demo
- Appendix A Product Specifications
- Appendix B HF RFID Standards and Tag Descriptions
- Appendix C Barcode Label Specifications
- Appendix D Enabling or Disabling Symbologies
- Appendix E Laser Decode Zone
- Appendix F Troubleshooting
- Appendix G Technical Support
- Limited Warranty
- Regulatory Compliance
RFID Settings
Note: These settings are only used with the SocketScan Plug-in keyboard wedge
programs and Scan Demo.
1. Tap on the SocketScan Plug-in icon. In the pop-up menu, tap Settings.
2. In the Prefix/Suffix screen, enter the characters you would like added to
each read/scan of data (128 character maximum).
Note:
Only
printable ASCII
characters can be
used as prefixes or
suffixes.
Note:
The default suffix is a carriage return.
If in the RFID Setup utility you selected Tag ID & Read Data, the prefix/suffix
is added to both the tag ID and the read data fields.
3. Tap on the Sound tab.
CHAPTER 4: SOCKETSCAN PLUG-IN SOFTWARE
19