User Manual

KwikBlue4-1

Bluetooth® Class 1 BC04 Module

Manual

Document#: CONFIDENTIAL Revision 0.1

3.3 RESET Sequence

RESET is asserted by module itself, the external reset circuit is not required.

3.4 UART (Universal Asynchronous Receiver Transmitter)

UART_TxD, UART_RxD, UART_RTS, UART_CTS form a conventional asynchronous data serial

port. The interface is designed to operate correctly when connected to other UART devices such as

the NS16550A. The signaling levels are 0V and VCC. The interface is programmable over a variety

of bit rates; none, even or odd parity; one or two stop bits and hardware flow control on or off. The

default condition on power-up is pre-assigned in the Flash memory.

The maximum UART data rate is 1.3824 Mbps. Two-way hardware flow control is implemented by

UART_RTS and UART_CTS. UART_RTS is an output and is active low. UART_CTS is an input

and is active low. These signals operate according to normal industry convention.