User Manual
Table Of Contents
- Overview
- Hardware Description
- System Requirements
- Desktop Test Set-up
- Hardware Configuration
- WinCE Test Setup
- HCI Test Setup
- Suspend\Resume
- Bluetooth Driver List
- Certification Testing Utilities
- KwikBlue Development Board Jumpers
- Audio CODEC Setup (Optional)
- KwikBlue Development Board Bill of Materials (BOM)
- CODEC Board Bill of Materials (BOM)
- Errata
- Appendix A: BC01 vs. BC02 Pin Assignments
KwikBlue Module Development Kit Installation Guide
16. Appendix A: BC01 vs. BC02 Pin Assignments
BC01 vs. BC02 Pin Assignments
BC01 – Class 1 BC02 – Class 2 BC02 – Class 1 Changed
between
Class 1 & 2
Pin #
GROUND GROUND GROUND 1
PCM_OUT PCM_OUT PCM_OUT 2
PCM_IN PCM_IN PCM_IN 3
PCM_PWR_DWN PIO_1 PIO_5 YES 4
VBUS_IN PIO_4 PIO_4 5
UART_RXD UART_RXD UART_RXD 6
UART_TXD UART_TXD UART_TXD 7
RESET RESET RESET 8
USB_WAKE PIO_3 PIO_3 9
VCC SPI_CSB SPI_CSB YES 10
GROUND GROUND GROUND 11
UART_RTS UART_RTS UART_RTS 12
USB_DETACH SPI_CLK SPI_CLK YES 13
UART_CTS UART_CTS UART_CTS 14
PCM_SYNC PCM_SYNC PCM_SYNC 15
USB_D+ PIO_2 PIO_2 YES 16
USP_D- SPI_MOSI SPI_MOSI YES 17
PCM_CLK PCM_CLK PCM_CLK 18
NC SPI_MISO SPI_MISO YES 19
VCC_PA VCC_3.3V VCC_3.3V 20
Table 6: BC01 vs. BC02 Pin Assignments
April 23, 2004 Copyright © 2003-2004 Socket Communications, Inc. Page 23
Document#: 6410-00215-C CONFIDENTIAL Revision 1.04