User Manual
Table Of Contents
- Overview
- Hardware Description
- System Requirements
- Desktop Test Set-up
- Hardware Configuration
- WinCE Test Setup
- HCI Test Setup
- Suspend\Resume
- Bluetooth Driver List
- Certification Testing Utilities
- KwikBlue Development Board Jumpers
- Audio CODEC Setup (Optional)
- KwikBlue Development Board Bill of Materials (BOM)
- CODEC Board Bill of Materials (BOM)
- Errata
- Appendix A: BC01 vs. BC02 Pin Assignments
KwikBlue Module Development Kit Installation Guide
Reproduction of the contents of this manual without the permission of Socket Communications is
expressly prohibited.
Please be aware that the product described in this manual may change without notice.
This manual has been prepared with the greatest care regarding its contents. However, in the event that it
contains omissions, errors or any other misinformation, please feel free to direct comments to:
Embedded Systems Group (ESG)
Socket Communications, Inc.
37400 Central Court
Newark, CA 94560
You are also welcome to call Socket Communications at (510) 744-2700, FAX inquiries to (510) 744-
2727, or you may send an e-mail to ESG@Socketcom.com. Information on Socket products can also be
obtained from our web site at:
www.socketcom.com.
This product is covered by Part I (EU-VO Nr.1334/2000). The export of goods covered by Part I of the
Export List is subject to licensing (Article 3 EU regulation, Section 5 AWV).
Other than the above, Socket Communications can assume no responsibility for anything resulting from
the application of information contained in this manual.
April 23, 2004 Copyright © 2003-2004 Socket Communications, Inc. Page ii
Document#: 6410-00215-C CONFIDENTIAL Revision 1.04