User Manual
Table Of Contents
- Overview
- Hardware Description
- System Requirements
- Desktop Test Set-up
- Hardware Configuration
- WinCE Test Setup
- HCI Test Setup
- Suspend\Resume
- Bluetooth Driver List
- Certification Testing Utilities
- KwikBlue Development Board Jumpers
- Audio CODEC Setup (Optional)
- KwikBlue Development Board Bill of Materials (BOM)
- CODEC Board Bill of Materials (BOM)
- Errata
- Appendix A: BC01 vs. BC02 Pin Assignments
KwikBlue Module Development Kit Installation Guide
6. WinCE Test Setup
The information below pertains to Socket’s Bluetooth WinCE driver Versions - Drakar Stack Version
1.4.3.38 and previous. It does not apply to Drakar Stack Dev Version 1.4.4.0 and higher. The KwikBlue
module is available in two configurations: HCI and Virtual Machine (VM). The default factory delivery is
with a HCI stack interface. Please contact Socket for information on VM configurations since they are
typically custom configurations.
HCI (Host Controller Interface): the Bluetooth stack drivers are run under an OS (currently the
drivers are for the Windows CE OS).
Virtual Machine (VM): in this mode, a scaled-down version of the Bluetooth stack runs on the
KwikBlue module itself. The module can be programmed to run a small application. The module
does not need any other drivers.
April 23, 2004 Copyright © 2003-2004 Socket Communications, Inc. Page 11
Document#: 6410-00215-C CONFIDENTIAL Revision 1.04