User Manual
Table Of Contents
- Overview
- Hardware Description
- System Requirements
- Desktop Test Set-up
- Hardware Configuration
- WinCE Test Setup
- HCI Test Setup
- Suspend\Resume
- Bluetooth Driver List
- Certification Testing Utilities
- KwikBlue Development Board Jumpers
- Audio CODEC Setup (Optional)
- KwikBlue Development Board Bill of Materials (BOM)
- CODEC Board Bill of Materials (BOM)
- Errata
- Appendix A: BC01 vs. BC02 Pin Assignments
KwikBlue Module Development Kit Installation Guide
You can now run the BlueChat2.exe on the WinCE side. Select the "Role" for one system as the
Slave and the Role for the other system as the Master.
WinCE to WinCE test: you must have two WinCE systems set up as described above. Select
BCSP, the COM the serial card is on, and the baud rate. Select the "Role" for one system as the
Slave and the Role for the other system as the Master.
8) BlueTest.exe: BlueTest.exe is used to test various module functions. Select BCSP, the COM the
serial card is on, and the baud rate. Click on one of the "RF Test Mode" items such as TXSTART.
This will display a list of parameters in the "Test Arguments" window. This utility is used for
Bluetooth SIG and FCC conformance testing.
April 23, 2004 Copyright © 2003-2004 Socket Communications, Inc. Page 9
Document#: 6410-00215-C CONFIDENTIAL Revision 1.04