User Manual
Table Of Contents
- Overview
- Hardware Description
- System Requirements
- Desktop Test Set-up
- Hardware Configuration
- WinCE Test Setup
- HCI Test Setup
- Suspend\Resume
- Bluetooth Driver List
- Certification Testing Utilities
- KwikBlue Development Board Jumpers
- Audio CODEC Setup (Optional)
- KwikBlue Development Board Bill of Materials (BOM)
- CODEC Board Bill of Materials (BOM)
- Errata
- Appendix A: BC01 vs. BC02 Pin Assignments
KwikBlue Module Development Kit Installation Guide
2.5. Optional CODEC Board
Figure 5: Optional CODEC Board
This optional board provides an interface to the industry standard Motorola MC145483 telephone
quality CODEC. The CODEC board has the following features:
2.5 mm jack for microphone/line-in (MIC)
2.5 mm jack for speaker/line-out (PHN)
3.5 mm combination microphone speaker jack (J9)
Note: the speaker output is designed to drive a 700 ohm or greater load.
Please refer to the MC145483 data sheet for more information.
April 23, 2004 Copyright © 2003-2004 Socket Communications, Inc. Page 5
Document#: 6410-00215-C CONFIDENTIAL Revision 1.04