User Manual
Table Of Contents
- Overview
- Hardware Description
- System Requirements
- Desktop Test Set-up
- Hardware Configuration
- WinCE Test Setup
- HCI Test Setup
- Suspend\Resume
- Bluetooth Driver List
- Certification Testing Utilities
- KwikBlue Development Board Jumpers
- Audio CODEC Setup (Optional)
- KwikBlue Development Board Bill of Materials (BOM)
- CODEC Board Bill of Materials (BOM)
- Errata
- Appendix A: BC01 vs. BC02 Pin Assignments
KwikBlue Module Development Kit Installation Guide
2.4. KwikBlue Module Development Board
Figure 4: KwikBlue Development Board
The KwikBlue Module Development Board includes the following features:
Connector J1 support for KwikBlue-1 or KwikBlue-2 Modules.
RS 232 serial port with 9-pin right angle D-type male connector (J2)
Power jack connector for 5 VDC power adapter (J4)
April 23, 2004 Copyright © 2003-2004 Socket Communications, Inc. Page 4
Document#: 6410-00215-C CONFIDENTIAL Revision 1.04