Technical Manual

Bluetooth Raw Serial Module Technical Specification

Document#: 6410-00195 A Revision 0.7

6.3.7. Connectable on/off: "ON" or "OFF"

Set the device into ‘connectable’ mode

C0 <ON|OFF><CR>

Example:

“C0OFF<CR>” – Become non-connectable

“C0ON<CR>” – Become connectable

6.3.8. Specify Page Scan Timing

Set the Page Scan timing parameters

C1<

Page_Scan_Interval>,<Page_Scan_Window><CR>

Default: 4096,18

Example:

“C11024,512<CR>”

Note:

To enable scanning the values for Interval and Window must be in the range of 18 to

4096. The Window value must be less than the Interval value. Both values must be

zero to disable scanning.

Page scan timing is described in the Bluetooth V1.1 Core Specifications for up to

date information see: http://www.bluetoothsig.org/specifications.htm

6.3.9. Enable Discoverable

Set the device into ‘discoverable’ mode

D0 <ON|OFF><CR>

Example:

“D0OFF<CR>” – Become non- discoverable

“D0ON<CR>” – Become discoverable

6.3.10. Specify Inquiry Scan Timing

Set the Inquiry Scan timing parameters