Technical Manual

Bluetooth Raw Serial Module Technical Specification

Document#: 6410-00195 A Revision 0.7

1. Introduction

1.1. Product definition

In the Module product line there will be 2 versions of products:

Raw Serial Module – External Power - Provide a basic Serial Cable replacement function

with some user accessible command modes

Bluetooth HCI module – Provide Host Command Interface for Bluetooth stack implemented

on an external local host processor.

This document will describe only the Raw Serial Module.

1.2. Feature List

· Very small size

· Low Cost

· Socket Cost : External Power Version: $30-35 range

· Industrial Application target design

· Initially offered in Class 2 BT Radio but will offer Class 1 later

· External Power device will run off 3.3 external power

· Firmware and module code upgradeable in the field via programming interface

· Security and bonding supported

· Low power Bluetooth modes: Sniff, Park and Hold

· Not suitable for Baud Rates below 9600 Baud

1.3. Notation

Numbers are in decimal except:

· Numbers with an “h” suffix are in hexadecimal.

· Numbers with a “0x” prefix are in hexadecimal.

· Numbers with a “b” suffix are in binary.