Quick Start Guide

5. Now you are ready to start the connection.

Pocket PC — Go to Start | Programs | Connections. Tap on the Bluetooth

connection you just set up. Make sure the correct dialing information is

entered, then tap Connect.

Pocket PC 2002 — When you return to the Connections screen, under

Internet Settings, tap Connect. In the next screen, make sure the correct

dialing information is entered. Tap OK.

HPC — Go to Start | Control Panel | Remote Networking. Tap on the

Bluetooth connection you just set up. Make sure the correct dialing

information is entered, then tap Connect.

6. FOR MOTOROLA TIMEPORT 270C ONLY:

After you tap Connect for the first time, the phone will display a

message asking if you want to bond. Enter YES. Make up a 4-8 digit

passkey, enter it on the phone, then enter it on the mobile computer.

After successfully bonding, you can set up the phone for automatic

connections.

Automatic Connections for Motorola

• On the phone, press MENU.

• Scroll to Settings, then press SELECT.

• Scroll to Connection, then press ON.

• On Bluetooth Link, press SELECT.

• Scroll to Devices, then press SELECT.

• Choose your mobile computer, then press EDIT.

• Scroll to Access:Ask, then press CHANGE.

• Scroll to Automatic, then press SELECT. Press DONE.

7. To use a different Bluetooth phone for dial-up networking, you can use the

same connection setup, but you must make the new phone your favorite.

Just run the Get Connected! Wizard again, select the new phone, and make

it your new Favorite when prompted. Or you can use the Bluetooth

Devices folder to change your favorite phone (see page 16).