User's Manual

About V.92 Quick Connect
Quick Connect is a V.92 modem specification that reduces the time needed
to establish a connection via faster handshaking. Handshaking (which
makes all the noise you hear while dialing in) typically takes 25-27
seconds, but with Quick Connect, lasts only about half as long.
When enabled with Quick Connect, the Socket Cordless 56K Modem will
store data about the last connection — or in other words, “train” itself for
the last phone line used. While dialing into a network, the Socket Cordless
56K Modem will compare the phone line characteristics with the stored
data, and if a match is found, the handshake starts using previous settings.
Quick Connect is convenient if you plan to repeatedly use the Socket
Cordless 56K Modem with the same phone line, for example the phone line
in your hotel room.
IMPORTANT! If you plan to use your modem in different
locations, Socket recommends that you disable
the Quick
Connect feature.
If you enable Quick Connect but use the modem in
different locations, the connection may take twice as long
to establish because it searches for the previous line
characteristics before trying to connect to the new line.
System Requirements
Your mobile computer should meet these minimum requirements:
• Bluetooth wireless technology
• Support for a Bluetooth Dial-up Networking Client
Minimum requirements for Socket software:
• Windows Mobile 2003/2003SE/5.0
• ActiveSync 4.0 or greater
• Connect!Agent
: Additionally, your Pocket PC must have the Broadcom
(Widcomm), Microsoft or Socket (SD/CF card) Bluetooth stack
*
Note: If your Pocket PC is not compatible with Connect!Agent, or if you do
not want to install it, use your device’s Bluetooth software.
V.92 Quick Connect requires a V.92 Internet Service Provider.
*
Socket Connect!Agent is not compatible on Windows Mobile 5.0 devices using the
Socket SD/CF Bluetooth card.
6