Charging Mount User Guide Charging Mount SKU# AC4088-1657 P/N 9010-01657
Package Contents Hanger Bolt Charging Mount USB Charging Cable 2 x Hex Nuts Command Barcode label to place on mount © 2020 Socket Mobile, Inc. All rights reserved. Socket®, the Socket Mobile logo, SocketScan®, DuraScan®, DuraSled™, DuraCase™ and Battery Friendly® are registered trademarks or trademarks of Socket Mobile, Inc. Microsoft® is a registered trademark of Microsoft Corporation in the United States and other countries.
Product Information Charging Pins LED* Magnet Hook Charging Mount *Illuminates Red when connected to AC adapter.
Assembly Overview A. B. C. D. E. Tapered lag-screw 1/4” - 20 Machine bolt thread F. Screws into wooden surface Screws into camera mount or Charging Mount A. B. C. D. Charging Mount Micro USB (2m) Cushion Crown Pem Cap / Camera Mount* E. F.
How to connect USB Cable A. B. C. A. Remove Micro USB cover. B. Insert Micro USB connector into port and fit usb cable into the cord keeper. C. Secure the cable to prevent from movement.
Charging Mount Operations When charging the scanner, make sure the charging pins on the Mount and the scanner make contact with each other and the red LED on the Mount is illuminated.
Charging Mount Operations 4-6 inches (10 - 15 cm) 7
Command Barcodes Charging Mount Modes Mobile Mode - Normal (default)* Scanning this barcode will enable the scanner to enter mobile mode. It will always be in manual trigger mode even when placed in the mount or cradle. *Scanner Factory Reset returns to Mobile Mode. Auto Mode (Presentation Mode) Scanning this barcode will enable the scanner to enter auto mode. When the scanner is in auto mode, it will switch to presentation trigger mode when it detects power on the cradle pins.
Auto Mode Auto Mode (In the Mount) Notification Action Behavior Beep Pattern LED Activity Place Scanner in the Mount Scanner switches to Presentation Mode High-high tone confirms proper seating* Battery status LED is disabled None Place a barcode in the scanner’s field of view Decode Barcode 1 Beep when data successfully scanned Green LED blinks (while scanning) None Vibrate Auto Mode: Barcodes placed in the Scanner’s field of view are automatically scanned.
Auto Mode Mobile Mode (Not in the Mount) Notification Action Behavior Beep Pattern LED Activity Vibrate Remove the Scanner from the Mount and press the Trigger button Scanner None switches to Mobile Mode Battery Status LED is Enabled Enabled Press the Trigger button Decode Barcode Green LED blinks (while scanning) Vibrate when Data successfully scanned 1 Beep when Data successfully scanned Mobile Mode: Pressing the Trigger button initiates a scan.
Auto Mode (Continued) 1. Pair and connect the D740, D745, D750, D755, D760, S740, S760 to your device prior to placing the scanner in Auto Mode. The Scanner is not discoverable when in Auto Mode and in the Mount. This facilitates a fast connection to the current connected device when powered on (for example the start of the new business day). 2. The Trigger button must be pressed to disable Presentation Mode (and enable Mobile Mode) after the scanner is removed from the Mount. 3.
Instructions for Mounting on wooden surface We include a Hanger Bolt to secure the Charging Mount directly to a wooden surface. Since the Pem Cap connects to a Camera Mount, popular with IP Cameras, many OEM solutions are available which do not require the Hanger Bolt. If you plan to use the Hanger Bolt follow the special instructions for mounting on a wooden surface. If you have many Hanger Bolts to install, you may want to use a 1/4”-20 Hanger Bolt Driver with an Electric Screw Driver.
Instructions for Mounting on wooden surface 1/4“ x 13/4” Special instructions for mounting on wooden surface: 1. Screw two Hex nuts (1/4”-20 thread, not included) onto the machine-threaded portion of the Hanger Bolt. 2. Use an open-ended wrench to lock the nuts against each other. 3. Drill a pilot hole into the surface you wish to place the Charging Mount. 4. Thread the lag portion of the Hanger Bolt into this surface as far as you can by hand. 5.
Configuration When Using a Camera Mount B. A. A. B. Attach the Pem cap to your Camera Mount (1/4” - 20, 3/4” depth thread) and turn to the right. Attach the Charging Mount to the Pem cap.
Product Specifications Dimensions Charging Mount Width 1.80 in (46 mm) Charging Mount Length 5.50 in (140 mm) Antimicrobial Rating JLS z2801:2000 Test: 2.49 on MRSA 6.07 when cleaned with SaniCloth Plus cloth wipes Biosafe HM4100, EPA#83019-1 Compliance Statement CE MARKING AND EUROPEAN UNION COMPLIANCE The unit under test was found compliant with all the applicable Directives, 2004/108/EC and 2006/95/EC.
Helpful Resources Technical Support & Product Registration: http://support.socketmobile.com Phone: +1 800-279-1390 (US Toll Free) +1 510-933-3020 (Worldwide) Socket Mobile Developer Program: Learn more at: https://www.socketmobile.com/developers The User’s Guide (full installation and usage instructions) and Command Barcodes (Advanced Scanner Configurations) can be download at: https://www.socketmobile.
2020 6430-00362F Printed in U.S.A.
