User's Manual
Table Of Contents
- Table of Contents
- 1 | Introduction
- Back
- Front
- 2 | Getting Started
- STEP 1: Install the Battery
- STEP 2: Charge the Battery
- STEP 3: Set up your SoMo 655
- STEP 4: Install Synchronization Software on Host PC
- STEP 5: Connect to Host Computer
- STEP 6: Set Up Your Device Partnership
- Windows 7/Vista
- Windows XP/2000
- Register SoMo 655
- Install Microsoft Windows Mobile Updates
- Set up Enhanced Wi-Fi Companion
- Set up SocketScan 10
- Configure A/B Mode Switch
- Set up Connect!Agent
- Sprite Backup Trial
- MobiScan Rapid Configuration Tool
- Set up Data Capture Triggers
- Set up WAN Connections
- Configure CF/SD slots
- 3 | Using the SoMo 655
- 4 | Wi-Fi Companion
- 5 | Socketscan 10 for CHS Series 7 Barcode Scanners
- 6 | Socketscan Plug-In for Scanners and Readers
- Appendix A
- Appendix B
- Appendix C
- Appendix E
- Appendix F
- Limited Warranty
- Disclaimer
- Limited Software Warranty
- Regulatory Compliance
45
A wizard will launch to help you create a profile for your network. Complete the wizard, entering the security
settings obtained from your network administrator.
Microsoft profile editor Socket profile editor
For Wi-Fi Companion, the Microsoft profile editor (Wireless Zero Configuration) will launch.
For Enhanced Wi-Fi Companion, a Socket profile editor will launch with dynamic configuration
and advanced security options.
4.
If your WLAN does not have a profile (i.e., no folder icon is shown next to it), tap and hold your stylus on the
WLAN in the list. In the pop-up menu, tap Get Connected.
A wizard will launch to help you create a profile for the selected SSID. Complete the wizard, entering the
security settings obtained from your network administrator.