User's Manual
Table Of Contents
- Table of Contents
- 1 | Introduction
- Back
- Front
- 2 | Getting Started
- STEP 1: Install the Battery
- STEP 2: Charge the Battery
- STEP 3: Set up your SoMo 655
- STEP 4: Install Synchronization Software on Host PC
- STEP 5: Connect to Host Computer
- STEP 6: Set Up Your Device Partnership
- Windows 7/Vista
- Windows XP/2000
- Register SoMo 655
- Install Microsoft Windows Mobile Updates
- Set up Enhanced Wi-Fi Companion
- Set up SocketScan 10
- Configure A/B Mode Switch
- Set up Connect!Agent
- Sprite Backup Trial
- MobiScan Rapid Configuration Tool
- Set up Data Capture Triggers
- Set up WAN Connections
- Configure CF/SD slots
- 3 | Using the SoMo 655
- 4 | Wi-Fi Companion
- 5 | Socketscan 10 for CHS Series 7 Barcode Scanners
- 6 | Socketscan Plug-In for Scanners and Readers
- Appendix A
- Appendix B
- Appendix C
- Appendix E
- Appendix F
- Limited Warranty
- Disclaimer
- Limited Software Warranty
- Regulatory Compliance
32
Wireless Radio Manager
Microsoft Wireless Manager
SoMo devices running Windows Mobile 6 include the Microsoft Wireless Manager by default. If
you install Enhanced Wi-Fi Companion, the Socket Radio Manager will appear instead (see next
page).
1.
To open the Microsoft Wireless Manager, press the button on the right side of the SoMo. Alternatively, tap
the Wi-Fi and Bluetooth status line in the Today screen.
2. In the Wireless Manager, an X appears next to the Wi-Fi or Bluetooth icon when the radio is off. Tap on the
button to turn on the radio.
Wi-Fi Companion software automatically launches after Wi-Fi is turned on.