User's Manual
Table Of Contents
- Table of Contents
- 1 | Introduction
- Back
- Front
- 2 | Getting Started
- STEP 1: Install the Battery
- STEP 2: Charge the Battery
- STEP 3: Set up your SoMo 655
- STEP 4: Install Synchronization Software on Host PC
- STEP 5: Connect to Host Computer
- STEP 6: Set Up Your Device Partnership
- Windows 7/Vista
- Windows XP/2000
- Register SoMo 655
- Install Microsoft Windows Mobile Updates
- Set up Enhanced Wi-Fi Companion
- Set up SocketScan 10
- Configure A/B Mode Switch
- Set up Connect!Agent
- Sprite Backup Trial
- MobiScan Rapid Configuration Tool
- Set up Data Capture Triggers
- Set up WAN Connections
- Configure CF/SD slots
- 3 | Using the SoMo 655
- 4 | Wi-Fi Companion
- 5 | Socketscan 10 for CHS Series 7 Barcode Scanners
- 6 | Socketscan Plug-In for Scanners and Readers
- Appendix A
- Appendix B
- Appendix C
- Appendix E
- Appendix F
- Limited Warranty
- Disclaimer
- Limited Software Warranty
- Regulatory Compliance
3
IMPORTANT SAFETY INSTRUCTIONS
Please read and follow these safety instructions before using your device for the first time, and save them for
future reference.
• Keep away from extremely hot, cold or humid conditions.
• Avoid using in dusty environments.
• Do not allow the device to get wet.
• Avoid strong force, shock or vibrations.
• Do not open your device. Any attempts to open this device will void the warranty.
• Do not place objects on top of the device.
• Avoid removing the battery without turning off the device.
• Do not charge the device in extremely hot or cold conditions.
• Please only use the supplied USB synchronization cable.
• Please do not use other chargers or AC adapters, as these may damage your device.
• Do not remove MSD/MMC or CF cards while they are being accessed.
• Do not use this device in damp, wet or rainy conditions.
• Do not insert metal objects into the sync/charging port of the SoMo.
• Keep the SoMo and its accessories away from children.