User's Manual
Table Of Contents
- Table of Contents
- 1 | Introduction
- Back
- Front
- 2 | Getting Started
- STEP 1: Install the Battery
- STEP 2: Charge the Battery
- STEP 3: Set up your SoMo 655
- STEP 4: Install Synchronization Software on Host PC
- STEP 5: Connect to Host Computer
- STEP 6: Set Up Your Device Partnership
- Windows 7/Vista
- Windows XP/2000
- Register SoMo 655
- Install Microsoft Windows Mobile Updates
- Set up Enhanced Wi-Fi Companion
- Set up SocketScan 10
- Configure A/B Mode Switch
- Set up Connect!Agent
- Sprite Backup Trial
- MobiScan Rapid Configuration Tool
- Set up Data Capture Triggers
- Set up WAN Connections
- Configure CF/SD slots
- 3 | Using the SoMo 655
- 4 | Wi-Fi Companion
- 5 | Socketscan 10 for CHS Series 7 Barcode Scanners
- 6 | Socketscan Plug-In for Scanners and Readers
- Appendix A
- Appendix B
- Appendix C
- Appendix E
- Appendix F
- Limited Warranty
- Disclaimer
- Limited Software Warranty
- Regulatory Compliance
28
MobiScan Rapid Configuration Tool
1. In the list of Getting Started wizards, tap MobiScan Rapid Configuration Tool.
2. Tap on the link. Follow the on-screen instructions to install the software.
For more information about SOTI MobiScan, please visit:
http://soti.net/mc/help/Content/Manager/MobiScan.htm
Set up Data Capture Triggers
For instructions on how to set up data capture triggers for Socket barcode scanners or RFID readers, please
refer to Chapter 6.
Set up WAN Connections
For instructions on how to set up WAN Connections with the SoMo 655 Back Pack wireless broadband
ExpressCard adapter (sold separately), please refer to Chapter 7.