User's Manual
Table Of Contents
- Table of Contents
- 1 | Introduction
- Back
- Front
- 2 | Getting Started
- STEP 1: Install the Battery
- STEP 2: Charge the Battery
- STEP 3: Set up your SoMo 655
- STEP 4: Install Synchronization Software on Host PC
- STEP 5: Connect to Host Computer
- STEP 6: Set Up Your Device Partnership
- Windows 7/Vista
- Windows XP/2000
- Register SoMo 655
- Install Microsoft Windows Mobile Updates
- Set up Enhanced Wi-Fi Companion
- Set up SocketScan 10
- Configure A/B Mode Switch
- Set up Connect!Agent
- Sprite Backup Trial
- MobiScan Rapid Configuration Tool
- Set up Data Capture Triggers
- Set up WAN Connections
- Configure CF/SD slots
- 3 | Using the SoMo 655
- 4 | Wi-Fi Companion
- 5 | Socketscan 10 for CHS Series 7 Barcode Scanners
- 6 | Socketscan Plug-In for Scanners and Readers
- Appendix A
- Appendix B
- Appendix C
- Appendix E
- Appendix F
- Limited Warranty
- Disclaimer
- Limited Software Warranty
- Regulatory Compliance
27
Set up Connect!Agent
Connect!Agent software is compatible with the Socket CHS Series 7 v1 or v2 and the Socket CRS Series 9.
1. In the list of Getting Started wizards, scroll down and tap Set up Connect!Agent.
2. Tap on the link. Follow the on-screen instructions to install the software.
Sprite Backup Trial
SoMo devices running Windows Mobile 6 Service Pack 5 or later include a free 10-day trial of Sprite Backup
software.
1. In the list of Getting Started wizards, tap Sprite Backup Trial.
2. Tap on the first link. Follow the on-screen instructions to install the software.
For more information about Sprite Backup, please visit: http://www.spritesoftware.com/products/sprite-
backup/full-edition