User's Manual
Table Of Contents
- Table of Contents
- 1 | Introduction
- Back
- Front
- 2 | Getting Started
- STEP 1: Install the Battery
- STEP 2: Charge the Battery
- STEP 3: Set up your SoMo 655
- STEP 4: Install Synchronization Software on Host PC
- STEP 5: Connect to Host Computer
- STEP 6: Set Up Your Device Partnership
- Windows 7/Vista
- Windows XP/2000
- Register SoMo 655
- Install Microsoft Windows Mobile Updates
- Set up Enhanced Wi-Fi Companion
- Set up SocketScan 10
- Configure A/B Mode Switch
- Set up Connect!Agent
- Sprite Backup Trial
- MobiScan Rapid Configuration Tool
- Set up Data Capture Triggers
- Set up WAN Connections
- Configure CF/SD slots
- 3 | Using the SoMo 655
- 4 | Wi-Fi Companion
- 5 | Socketscan 10 for CHS Series 7 Barcode Scanners
- 6 | Socketscan Plug-In for Scanners and Readers
- Appendix A
- Appendix B
- Appendix C
- Appendix E
- Appendix F
- Limited Warranty
- Disclaimer
- Limited Software Warranty
- Regulatory Compliance
25
Configure A/B Mode Switch
The A/B Mode Switch Utility lets you change the default behavior of the switch.
ROM v1.1 and later includes the utility. For previous ROMs, download the utility from:
http://www.socketmobile.com/support/downloads/handheld-computer/somo-655/
When the A/B Mode switch is activated, any connections or programs running on the SoMo will
remain active. By default the screen will turn off.
By default, the SoMo automatically suspends according to settings saved in the Power applet. To
access the applet, tap Start | Settings | System tab | Power.
1. In the list of Getting Started wizards, tap Configure A/B Mode switch.
2. Tap on the link in the wizard to access the A/B Mode Switch Utility.
Alternatively, tap Start | Settings | System tab | A/B Mode Switch.