User's Manual
Table Of Contents
- Table of Contents
- 1 | Introduction
- Back
- Front
- 2 | Getting Started
- STEP 1: Install the Battery
- STEP 2: Charge the Battery
- STEP 3: Set up your SoMo 655
- STEP 4: Install Synchronization Software on Host PC
- STEP 5: Connect to Host Computer
- STEP 6: Set Up Your Device Partnership
- Windows 7/Vista
- Windows XP/2000
- Register SoMo 655
- Install Microsoft Windows Mobile Updates
- Set up Enhanced Wi-Fi Companion
- Set up SocketScan 10
- Configure A/B Mode Switch
- Set up Connect!Agent
- Sprite Backup Trial
- MobiScan Rapid Configuration Tool
- Set up Data Capture Triggers
- Set up WAN Connections
- Configure CF/SD slots
- 3 | Using the SoMo 655
- 4 | Wi-Fi Companion
- 5 | Socketscan 10 for CHS Series 7 Barcode Scanners
- 6 | Socketscan Plug-In for Scanners and Readers
- Appendix A
- Appendix B
- Appendix C
- Appendix E
- Appendix F
- Limited Warranty
- Disclaimer
- Limited Software Warranty
- Regulatory Compliance
23
Set up Enhanced Wi-Fi Companion
By default, the SoMo has Wi-Fi Companion (WFC) installed. For SoMo devices running Windows Mobile 6
Service Pack 4 or later, Enhanced Wi-Fi Companion (e-WFC) is also pre-loaded but must be manually installed.
Enhanced Wi-Fi Companion offers many benefits, including advanced authentication (including PEAP-GTC,
EAP-TTLS, LEAP, EAP-FAST); WMM including transmit power control and CCKM; Cisco CCX 4.0 certification;
and a Socket profile editor with advanced functionality.
1. In the list of Getting Started wizards, tap Set up e-WFC.
2. To install the application, tap on the first link.
3. The device will begin to install the software. When prompted, choose where you will like the software
installed. Tap Install.
If you install the software in SoMo File Store, it will remain installed after a hard reset, but not
after a ROM flash.
4.
After installation, you will be prompted to restart the SoMo. Tap OK.