Quick Start Guide
7
Device Operang Informaon
Dimensions 4.75” x 2.5” x 1.25”
Weight 5.3 oz. (150 grams)
Sensor Technology Deep lung, Dart fuel-cell sensor
Battery Type Lithium-ion rechargeable battery, holds 10+ days
Power Supply USB-C charger, Output: 5V 1A
Breath Sample Duration 4 seconds
Operating Temperature 32°F - 113°F (0°C - 45°C)
Relative Humidity 80% non-condensing up to 87 degrees F (31°C), decreasing
linearly to 50% non-condensing at 104 degrees F (40 C°)
Min. Ambient Air Pressure 0.74 atm
Pollution Degree 2
Sensor Accuracy .+/- .005 BAC
Detection Range .000 - .400% BAC
Calibration Every 1,500 tests
Camera Color, digital, infrared technology
Test Data BAC, time of test, and photo
Components Breathalyzer, mouthpieces, charger, case
Manufactured ISO 9001, 14001, 13485, AS9100, and OHSAS 18001
Warranty 1 year limited
Technical Specifications
The user does not need to perform any tests at start up, the Device performs a self-test when
it is powered on and prior to a test submission. The self-test is meant to verify the proper
operation of the test storage memory, alcohol fuel cell, and imager. Failure of any of these
components indicates that the Device is unable to properly record test data. In this case, an
error code is displayed to the user and testing will not proceed.
Safety
There are no anticipated risks or discomforts utilizing the Device, however, if the Device is
used in rapid succession, dizziness may occur. For correct and eective use of the Device,
always consult this manual to familiarize yourself with the nature of the potential hazard and
actions to be taken to avoid them. The Device should not be used to determine if it is safe for
the user to drive. To ensure proper Device function, keep it fully charged.