User's Manual

No picture

• Check that the signal source is connected.

• Check that the setting may be in the wrong status. Match your source

selected correctly.

• Contact the service department.

Distorted picture

• Check the disc for fingerprints and clean with a soft cloth, wiping from

center to edge.

• Sometimes a small amount of picture distortion may appear. This is not a

malfunction.

Cannot advance through a

movie

• You cannot advance through the opening credits and warning information

that appears at the beginning of movies because the disc is programmed

to prohibit that action.

No sound or distorted

sound

• Make sure that the DVD player is connected properly, and all cables are

securely inserted into the appropriate jacks.

• If you are using the IR headphones, make sure you turn on the IR power.

• Make sure the FM modulator is on and the proper frequency has been

selected.

• Is volume turned “UP” on headphones?

• Is anything blocking signal between monitor and headphones?

Player does not respond to

all operating commands

during playback

• Operations are not permitted by the disc.

• Refer to the instructions in the disc inlay.

Device feels warm

• When the device is in use for a long period of time, the surface will

heated. This is normal.

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint