User's Manual

23. TV-Monitor B (If TV mode is available)

Transmit IR codes for TV mode of monitor B.

24. DVD-Monitor B

Transmit IR codes for DVD mode of monitor B.

25. SOUND AROUND SELECT (If available)

Select a FM transmitter channel. There are 6 channels:

CH1: 88.3MHz; CH2: 88.7MHz; CH3: 89.1MHz; CH4: 89.5MHz; CH5: 89.9MHz; CH6: 90.3MHz.

26. PIX (Picture Selection)

Each time the button is pressed, the picture adjustment OSD, cycles through bars for BRIGHTNESS,

CONTRAST, SATURATION, HUE, SHARPNESS, IR HEADPHONE, and RESET. Once the desired

adjustment bar is displayed, use the UP/DOWN button to adjust the setting. The bar display will

automatically disappear, if no adjustments are made within 6 seconds or if any button is pressed.

27. REPEAT

Press this button to switch the repeat mode by “ALL”, “TITLE”, “CHAPTER” and cancel the repeat

mode while playing DVD-video. Others disc type such as VCD, CD, and SVCD that only has

“ TRACK” and “ALL” two repeat mode can be selected.

Note: The both repeat function of VCD and SVCD need to turn the PBC status to ON then available.

28. A-B (Expect MP3)

Repeat from point A to point B.

29. R-S (If TV mode is available)

The button selects between Air TV and CATV modes.

30. ERASE/ADD (If TV mode is available)

When tuned to a channel, press the button to store or erase the channel from memory. The stored

channel numbers are displayed in green on the screen, and the non-stored channel numbers are in

PDF 檔案使用 "pdfFactory Pro" 試用版本建立 www.ahasoft.com.tw/FinePrint