User's Manual

Page 22 of 27
Warnings
 Do not use any solvents or cleaning materials when cleaning the video
system.
 Do not use any abrasive cleaners, they may scratch the screen. Use only a
lightly dampened lint free cloth to wipe the screen if it is dirty.
 Close the LCD screen in the fully closed position when not in use.
 Before putting on headphones always adjust the volume setting to the lowest
position.
 Do not put pressure on the screen.
 Caution children to avoid touching or scratching the screen, as it may
become dirty or damaged.
Trouble Shooting
(Q1) IR Sensor Inoperative
(1) Verify that the batteries in the remote are fresh.
(2) Verify that the remote sensor eye is not obstructed.
(3) Aim toward sensor, near top of monitor.
(4) Select on the remote control “DVD” to control the armrest
console
(Q2) No Picture
(1) Verify that the correct video source mode is used on the monitor
(DVD/AUX AV).
(2) Verify that the video cable is plugged into the jack securely (if the a/v
inputs are being used)
(Q3) No Sound
(1) Verify that the correct audio input mode is used on the monitor.
(2) Verify that the audio cable is plugged into jack securely (if the a/v inputs
are being used).