User's Manual

Page 16 of 27
Settings for Display
Press the SETUP button, use WX buttons to navigate to the General Setup Page, and then the
T button to select TV Display sub-menu. The setup allows you to adjust screen setting (aspect
ratio). Press X and then use the buttons ST to select the appropriate setting. The options are as
follows:
Normal/PS (Pan and Scan)
This displays the wide picture on the screen with a portion of the left & right sides removed
.
Normal/LB (Letter-Box)
This display the wide picture with black bands on the upper and lower portions of the screen.
Wide (16:9)
This option is chosen if the LCD panel is of wide screen.
Then press ENTER to confirm the screen.
Default Settings
Press the SETUP button, and use buttons WX and X to go to the Default sub-menu under
preference Page. The default setup allows you to reset all options to factory defaults. Press X
and then press ENTER to carryout the reset.
Note: This function will not affect the parental setting.