User's Manual

Page 12 of 27
General Operating Instruction
Turning the unit ON or OFF
1. Pivot/rotate the screen until a comfortable viewing angle is reached. The internal friction detent
will hold the screen in position while the system is in use.
2. Pressing the POWER button on the left-button corner of the front panel or the remote will turn
the system on or off alternately. When in use, the internal backlighting will illuminate the
buttons.
3. The unit will also power on when a disc is inserted into the slot.
4. Remember to turn the unit off and pivot the LCD to the locked position when not in use.
Remote Sensor
The unit has an integrated infrared signal which relays signals from the remote
control by simply pointing the remote control at the remote sensor eye (located at
the top of the monitor) and depressing the remote control buttons.