User's Manual

Page 11 of 27
31. NUMBERS
(1) Decimal number: 0 to 9
(2)+100: Add 100
32. AUTO MEMORY (If TV mode is available)
When the AUTO MEMORY button is pressed, all channels in TV mode are searched and
tuned ; all the channels with signals detected are automatically stored.
33. ERASE/ADD (If TV mode is available)
When tuned to a channel, press this button to store or erase the channel from memory. The
stored channel numbers are displayed in green on the screen, and the non-stored channel
numbers are in red. When the SKIP mode is on, the unit will be tuned to only the stored
channels when using the UP/DOWN buttons.
34. SKIP/SEARCH (If TV mode is available)
This button selects between SKIP and SEARCH modes. In SKIP mode, the TV only stops on
channels that are programmed into memory when the UP/DOWN buttons are used. When the
SKIP mode is off, TV will stop on all active channels.
35. R-S (If TV mode is available)
This button selects between Air TV and CATV modes.
36. SOUND AROUND SELECT(If fm transmitter is available)
Select a FM transmitter channel. See Accessory Instruction section for detailed channel info.
37. SOUND AROUND ON/OFF (If fm transmitter is available)
Turns FM Transmitter power ON/OFF.
38. MUTE (For DVD only )
Press this button to shut off the sound at the headphone station. The screen will display that
the sound has been turned off. Pressing the button again restores sound to the previously set
Level.
39. PIX (Picture Selection)
Each time this button is pressed, the picture adjustment OSD cycles through bars for
BRIGHTNESS, CONTRAST, COLOR, and TINT. Once the desired adjustment bar is
displayed, use the RIGHT/LEFT button to adjust the setting. The bar display will automatically
disappear, if no adjustments are made with in 6 seconds or if any other button is pressed.
40. TV –Not applicable
41. DVD – Depress for using remote to control armrest video console.
Transmit IR codes for DVD/AV mode of armrest video monitor (this mode is used for
controlling all functions, except tv mode (if available)